Instructions
What’s Included:
- DANGL Tool - Electric Skate Tool
- Dual-Sided Skate Bit
- USB-C Charging Cable
How to Use:
- Our dual-sided roller hockey skate bit features four useful roller hockey tools in one.
- To insert or remove the skate bit, push up on the chuck of the tool body.
- Flip the drill bit to access the tools on the other side of the bit.
- To avoid stripping any bolts, we always suggest loosening all bolts with half a manual turn of the tool and finishing any tightening manually. Avoid over tightening.
- To loosen bolts, use the down arrow closest to the bottom of the tool.
- To tighten bolts, use the up arrow closest to the skate bit.
Skate Bit Explained:
- 4mm Hex - Used to adjust the axle bolts on most roller hockey skates.
- Phillips #2 - Commonly used for helmet bolts.
- Bearing Press - Use the 4mm Hex side of the skate bit to push on the spacer portion of the bearing to remove.
- Bearing Extractor - Use the shoulder on the skate bit to push out the final bearing once the press has removed the initial bearing and spacer.
Charging:
- Included with the DANGL Tool is a USB-C Charging Cable. Charging time is approximately 1 hour.
REMINDER - Please store the DANGL Tool in a dry area away from moisture and sweat!